Fresco

Simix A/C Ceramic Coating fills in microscopic gaps caused by pollution and salt air, leaving a smoother surface that transfers heat more efficiently.

Save Money

Fresco Coating keeps the AC cleaner longer that saves you form maintenance costs.

Unit lasts longer thus saving you capital expenditures on replacing AC units more often.

Coating conducts energy and transfers heat, improves air flow thus saving you energy cost.

Save Environment

Coated AC units require less frequent maintenance thus saves water and cleaning materials.

Less energy consumption means less toxic fumes released form power plants.

FREQUENTLY ASKED QUESTIONS

How does Simix A/C Ceramic Coil Saver Coating work?

Simix A/C Ceramic Coil Saver Ceramic Coating is a super-hard liquid glass that will never yellow, chip, peel or crack. Just like in glass, the primary ingredient in Simix is silica (sand) mixed with extremely hard mineral potassium and lithium. Simix A/C Ceramic Coil Saver Coating conducts heat and is not an insulator like other coatings.

How is Simix A/C Ceramic Coil Saver Coating applied?

Simix A/C Ceramic Coil Saver Coating is easy to apply in the field. We recommend that you clean your A/C unit with Simix Multi-Surface Cleaner/Degreaser/Sanitizer first. Then you spray A/C Ceramic Coating on to the entire unit. The coating dries in about 20 minutes.

Why do you need Simix A/C Ceramic Coil Saver Coating?

Air conditioners start losing efficiency the moment you install them. That is because they are immediately bombarded with particulate matter that leaves behind tiny holes. Tiny gaps are also created by the contraction and expansion of the tubes and fins. Simix A/C Ceramic Coil Saver Coating fills in those microscopic gaps, leaving behind a smoother surface that transfers heat more effectively.

How much will I save by using Simix A/C Ceramic Coil Saver Coating? If your air conditioner is newer, you should save about 10% on your annual costs. If you air conditioners are older, you will save 20% or more on annual energy costs. Owners and operators of large warehouses and office campuses can easily save thousands of dollars per year.

SAVING 38%

ON AIR CONDITIONING

IN THE PHILIPPINES

MANILA, PHILIPPINES (July 27, 2018) - Simix makes it easy to save thousands of dollars per year on air conditioning.

Our partners in the Philippines used Simix A/C Ceramic Coating on one conditioner, then compared it to another unit that was the same make and model, installed in the same year, doing the same work.

On a single test day in the hot summer month of January, the Simix-coated unit used 9 kWh while the untreated unit used nearly three times as much energy -- 24 kWh.

Over the course of 15 days, the Simix-coated unit used 151 kWh while the untreated unit used 243 kWh. That's a 38% energy savings.

AIRSPEED 18% FASTER AFTER AIR CONDITIONER IS CLEANED AND COATED

In a very warm September, Simix cleaned and coated an air conditioner at a large facility in Boone County, Missouri.

The unit was extremely dirty. Before it was coated, the air speed above the fan was 4.2 mph. After the unit was cleaned with Simix Multi-Surface Cleaner, the airspeed was recorded at 8.2 mph.

Immediately after the unit was cleaned, it was coated with Simix A/C Ceramic Coating, and the airspeed was 9.7 mph. That is an 18% improvement over 8.2 mph.

That improvement lead to much lower energy costs.

SIMIX A/C CERAMIC COATING LOWERS TEMPERATURE BY 16%

Simix cleaned and coated a 2.5 ton Lennox residential unit in Wisconsin.

Before coating, the temperature of the air coming out of the register was 58 degrees.

After the unit was coated with Simix A/C Ceramic Coil Saver Coating, the temperature was 49 degrees, a 16% improvement.

This improvement in efficiency means that the homeowner will be paying less for air conditioning.

Page updated

Google Sites

Report abuse